| Customization: | Available |
|---|---|
| Type: | Surgical Supplies Materials |
| Material: | Plastic |
|
Still deciding? Get samples of US$ 22/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Guiding Catheters are intended for use for intravascular introduction of interventional/diagnostic devices into coronary or peripheral vascular systems.
1. Flat-wire-braided, 100-cm catheter shaft with PTFE liner
2. One-piece molded hub and strain relief 3. Curves designed for transradial access 4. Radiopaque for fluoroscopic visualization 5. Soft, radiused tip 6. Ultra-thin tube with flat wire braid pattern to provide large lument for devices smooth delivery 7. Hydrophilic coating 8. Kink resistance ** Recommended Procedure 1) Remove the guiding catheter from its packaging using sterile techniques. 2) Flush the guiding catheter lumen with a heparinized saline solution. 3) Appropriate anticoagulation and vasodilation therapy should be used. 4) Introduce the guiding catheter into the vasculature through the catheter sheath introducer, and/or over an indwelling guidewire using a percutaneous entry technique of choice. 5) Under fluoroscopic guidance, advance the guiding catheter over the guidewire or introducer until the desired position is attained. 6) Remove the guidewire prior to introduction of other intravascular devices or infusion of contrast agents. ** Complications Use of guiding catheters should be restricted to those specialists trained to perform procedures for which the product is indicated.Complications may occur at any time during or after the procedure and may include, but are not limited to, the following: hemorrhage, hematoma, allergic reaction, infection, embolism, blood vessel dissection or occlusion.
Size comparison table of specifications and models
|
||||||||||||||||||||||||||||||||||||
){kind=link}